| |
| |
Products |
|
| |
Esteemed Clients |
|
| |
|
|
| |
| Grades and SpecificationsFlat ProductsLong ProductsBright / Peeled Bars |
| |
| Chrome Molybdenum Steel |
| Overview |
We supply chromium molybdenum steel, chromium molybdenum nickel steel and chromium molybdenum tungsten steel to various engineering, power generation, oil & gas, petrochemical, welded tube fitting and nuclear industries. Our facilities enable us to cater to the specific requirement of the customers. |
| Application |
Boiler Pressure Vessels, Tube & Pipe fittings, refinery equipments for elevated temperature service. |
| Grades |
ASTM A387 Grade 11/ 12/ 22/ 5/ 9/ 91, EN 10028 -2 / DIN 17175 , ASTM A204 / A302, SAE 4130 / 4140 / 8620, EN 19 / EN 24 / EN 36 |
| Supply Condition |
Normalized & Tempered / Annealed / Normalized. |
| Abrasion / Wear Resistant Steel |
| Overview |
The hardened boron steel is extremely resistant to abrasive wear and high surface pressure. The excellent mechanical properties of boron steels are achieved through heat treatment. It also offers good weldability with cold bending properties. |
| Application |
Wherever demands are imposed on abrasion resistance e.g. dump trucks, excavators, loaders, chutes, conveyors, feeders etc. |
| Grades |
500HB / 400HB / 300HB / 200HB |
| Supply Condition |
Quenched & Tempered(If required) |
| Quenched and Tempered Steel |
| Overview |
Quenched and tempered fine grained steel is used for welded steel structures having demands of low weight and high load. |
| Application |
Pressure vessels, penstocks, bridges, transport vehicles, cranes, frameworks, conveying plants etc. |
| Grades |
EN 10025-6-S500 / S550 / S620 / S690 |
| Supply Condition |
Quenched and Tempered |
| High Tensile Steel |
| Overview |
The structural steel with high tensile properties is used for general construction so as to reduce the section weight. |
| Application |
Fabrication, Engineering construction |
| Grades |
EN 10025-2-S355 / S420 / S460. IS 2062 E350/ E410 / E450 |
| Supply Condition |
Normalised / Normalised Rolled |
| Corrosion Resistant Steel |
| Overview |
It exhibits increased resistance to atmospheric corrosion compared to unalloyed steel as it forms and regenerates a protective layer under the influence of the weather. |
| Application |
Steel frame structures, bridges, tanks, containers, exhaust systems etc. |
| Grades |
ASTM A588 / A242. IRSM - 41 |
| Supply Condition |
Normalised Rolled / Normalised |
| Tool Steel |
| Overview |
Hot & Cold work tool steels as per the Standard (A681) as well as customer requirement is produced based on design application, service condition and desired properties. |
| Application |
Tools, Dies & Fixtures |
| Grades |
A2 / H11 / O1 / D2 / D3/ S-13 / HCHCR |
| Supply Condition |
Spherodise Annealed |
| Pressure Vessel Steels |
| Overview |
This Carbon steel plates are intended for welded pressure vessels, iron sturctures where improve notch toughness is important. |
| Application |
Pressure Vessel Boiler, Tube Fittings |
| Grades |
ASTM A516 / A515. ASTM A537 CL.1 & CL.2 |
| Supply Condition |
Normalised / Normalise Rolled/ Quenched & Tempered |
| Other Alloy Steels |
| Overview |
The various special steels having diverse applications are produced as per customer requirement. |
| Application |
Automobile, Valves, Bearing, Extruders, Springs |
| Grades |
16/20MnCr5,EN52, EN1A,EN41, EN31,56Si7,42CrMo4 |
| Supply Condition |
As Rolled / Annealed / Normalised / Quenched & Tempered |
|
|
|
|
|
